SP-1 Remote
Firmware for SP-1 (Teenage Engineering)
Turns the SP-1 into a generic four-fader, four-button MIDI controller that sends CCs over USB MIDI and the TRS sync jack, with a control table defined in one source file.
- Distribution
- Build from source yourself
- Source
- github.com https://github.com/mortenwagner/sp1-remote
- midi
- usb-midi
- performance
Description
The default profile maps the faders and buttons to controls on the PopGoblin string synth running on a Tiliqua, but only one table in the source (firmware/src/profile.c) is specific to it. Two buttons save and recall presets, and presets persist across power cycles. The README reports that USB MIDI and TRS MIDI out work on hardware and lists host-side tests for the decision logic.
Install notes
Build with Zephyr v4.3.1 and flash build/zephyr/zephyr.bin with the Solderless utility in Chrome or Edge. Holding Track 1 and Track 4 for about 1.2 seconds while the firmware runs resets into the bootloader.
Version history
| Version | Date | Notes |
|---|---|---|
| main @ 03bc636 | 2026-08-08 | No tagged releases; this is the latest commit. |