PedalPCBPedals & multi-FX
Daisy Seed pedal PCB with six knobs and two footswitches
The Terrarium is a bare printed circuit board from PedalPCB that carries an Electrosmith Daisy Seed and the controls of a digital effects pedal, listed in 2020. It is designed for a 125B enclosure with top-mounted jacks and provides six potentiometers, four toggle switches, two momentary footswitches and two LEDs. The builder supplies the Daisy Seed, components and enclosure.
A 125B-format PCB for a Daisy Seed. Pedal firmware for it is flashed with the Electrosmith web programmer or DFU, so no manufacturer firmware is replaced. The GuitarML Seed pedal and the bkshepherd Guitar Pedal framework both run on the Terrarium hardware.
Multi-effect pedal framework by Keith Shepherd that abstracts the hardware so a library of effect modules runs on the PedalPCB Terrarium and the author's own 125B and 1590B Daisy Seed pedal designs.
by Keith Shepherd (bkshepherd)
Tape-wear effect for the Terrarium with wow, flutter, dropouts, saturation and hiss, plus a bypass footswitch and a hold-to-slow tape-stop footswitch.
by Aalenberg
| Version | Date | Notes |
|---|---|---|
| main @ b9a183b | 2026-10-09 | No tagged releases; this is the latest commit. |
Multi-effect firmware for the PedalPCB Terrarium: neural amp and overdrive models, reverb, delay, tremolo and a five-minute reversible looper. Prebuilt .bin on the release page.
| Version | Date |
|---|---|
| v1.0 | 2023-12-08 |