OpenDeck
Firmware for OpenDeck boards (Shantea Controls)
Open MIDI and OSC firmware for building custom controllers on many boards, configured from a browser with no firmware coding. Handles buttons, encoders, LEDs, pots, FSRs, displays and sensors.
- Distribution
- Prebuilt image you flash yourself
- Source
- github.com https://github.com/shanteacontrols/OpenDeck
- Homepage
- shanteacontrols.com https://shanteacontrols.com/
- midi
- platform
- ui
- controller-mode
Description
Created by Igor Petrovic and maintained under Shantea Controls. The current codebase runs on Zephyr RTOS. Features include 7-bit and 14-bit NRPN, latching buttons, several encoder modes, output control from MIDI In, OSC over Ethernet with mDNS discovery, network-based configuration and firmware updates, Nextion and SSD1306 displays, and several OSC-only sensors. The configurator is available online and as an offline app.
Install notes
Choose a supported board, flash a release build, then configure in the browser configurator over USB or the network.
Version history
| Version | Date |
|---|---|
| v8.5.2 | 2026-08-03 |
| v8.5.1 | 2026-06-14 |
| v8.5.0 | 2026-06-12 |