Stutterer Legio
Firmware for Legio (Noise Engineering)
Stereo stutter, tape delay and DJ filter chain with clock sync, inertial tape speed on the encoder, selectable stutter subdivisions, a clock multiplier switch and a wet/dry switch.
by Carl Tashian
- Distribution
- Build from source yourself
- License notes
- Per the repository LICENSE file.
- Source
- github.com https://github.com/tashian/legio-stutterer
- Homepage
- github.com https://github.com/tashian/legio-stutterer
- fx
- delay
- looper
- filter
Description
Audio runs through the stutter, then the tape delay, a DJ filter and a soft clipper. The gate input is an external clock that falls back to 120 BPM after two seconds without edges, and holding the encoder at power-up starts a bypass mode. The V/Oct input is read but currently ignored. One of three Legio firmwares by the same author.
Install notes
No prebuilt binary. Build with make and flash with make program-dfu after entering the bootloader (hold BOOT and press RESET on the Patch SM). Noise Engineering's firmware portal restores the stock firmware.
Version history
| Version | Date | Notes |
|---|---|---|
| main @ 0ba65ca | 2026-09-22 | No tagged releases; this is the latest commit. |