Crafted Volts
Firmware for Workshop System Computer (Music Thing Modular)
Manually set control voltages (CV) with the input knobs and switch. It also attenuverts (attenuates and inverts) incoming voltages.
by Brian Dorsey
MaintainedSource: openunspecified
- Distribution
- Prebuilt image you flash yourself
- License notes
- Upstream info.yaml says: MIT OR Apache-2.0
- Source
- github.com https://github.com/TomWhitwell/Workshop_Computer/tree/main/releases/24_crafted_volts
- Homepage
- computer.musicthing.co.uk https://computer.musicthing.co.uk/programs/24-crafted-volts/
- Synced from
- upstream metadata, raw.githubusercontent.com https://raw.githubusercontent.com/TomWhitwell/Workshop_Computer/main/releases/24_crafted_volts/info.yaml. Corrections belong upstream.
- utility
- cv
- attenuverter
- voltage-source
- cards
Description
CV utility for generating manual voltages and attenuverting incoming control signals. Main, X, and Y knobs each drive a paired output; patching into corresponding inputs replaces knob value and applies attenuverting. Pulse outputs follow Z switch state as complementary high/low gates. LEDs mirror output voltage levels in the same 2x3 physical layout as output jacks. LEDs are off at -6v and get brighter as the voltage goes up.
Install notes
Copy the UF2 onto the Computer's program card (RP2040 bootloader drive).
Version history
| Version | Date | Notes |
|---|---|---|
| v0.2.0 | 2025-03-15 | Version and date from the card's info.yaml. |