JP8k-sandsquall
Firmware for Workshop System Computer (Music Thing Modular)
JP-inspired Supersaw oscillator with CV/MIDI synth and a web-editable sting sequencer.
by Adrian Vos
- Distribution
- Prebuilt image you flash yourself
- Source
- github.com https://github.com/TomWhitwell/Workshop_Computer/tree/main/releases/118_JP8K
- Homepage
- computer.musicthing.co.uk https://computer.musicthing.co.uk/programs/118-jp8k/
- Synced from
- upstream metadata, raw.githubusercontent.com https://raw.githubusercontent.com/TomWhitwell/Workshop_Computer/main/releases/118_JP8K/info.yaml. Corrections belong upstream.
- oscillator
- synthesizer
- supersaw
- drone
- cv-gate
- virtual-analog
- cards
Description
A Workshop Computer JP-inspired Supersaw voice: a wide, animated stack of saw oscillators with a web-editable built-in sequencer and a familiar default phrase. Sent editor patterns are restored after power cycling. Flip Z up for a playable CV/MIDI synth voice, or set Z middle for a clockable 32-step sequencer. From sequencer mode, Z down starts or stops the internal sequencer when no clock is active. X spreads seven fixed-point saw oscillators, while Y darkens or brightens the stack before it leaves the stereo audio outs. USB MIDI works in both device and host modes for note/gate playability, pitch bend, and basic CC control.
Version history
| Version | Date | Notes |
|---|---|---|
| 0.1.23 | 2026-09-30 | Version and date from the card's info.yaml. |