WvTable-logue
Firmware for minilogue xd (Korg)
Wavetable oscillator for the minilogue xd inspired by PPG Wave, using waves and wavetables from the PPG Wave 2.3 ROM, with wavecycle skew; untested on the prologue and NTS-1.
by Greg Vuki
- Distribution
- Prebuilt image you flash yourself
- Source
- github.com https://github.com/vuki/WvTable-logue
- Homepage
- github.com https://github.com/vuki/WvTable-logue/releases
- oscillator
- wavetable
- ppg
- open-source
- minilogue-xd
Description
The oscillator uses the waves and wavetables from the PPG Wave 2.3 ROM. The author says it is not an emulation, because the original ran two oscillators with sub oscillators at a sample rate near 195 kHz that the Cortex-M4 cannot match. Shape selects the wavetable index and Shift-Shape sets the wavecycle skew. The README says it may also work on the NTS-1 and prologue but was not tested there, and is not compatible with other logue instruments. A JUCE plug-in and test module are included for testing.
Install notes
Download the unit from the releases page and load it with Korg's librarian or logue-cli.
Version history
| Version | Date |
|---|---|
| release_2.01 | 2025-02-05 |
| release_2.00 | 2024-12-04 |
| release_1.00 | 2023-08-06 |